DGAP-News: SINGULUS TECHNOLOGIES reports financial results for the first nine months of 2017

Nachricht vom 09.11.2017 (www.4investors.de) -


DGAP-News: SINGULUS TECHNOLOGIES AG / Key word(s): Quarterly / Interim Statement

SINGULUS TECHNOLOGIES reports financial results for the first nine months of 2017
09.11.2017 / 08:00


The issuer is solely responsible for the content of this announcement.
Press Release

SINGULUS TECHNOLOGIES reports financial results for the first nine months of 2017

CIGS production machines commissioned in China at the moment
Additional orders for production machines for HJT high performance solar cells
Joint venture for HJT solar cells with GCL in China
Entry into medical technology market, first order booked
Vacuum coating machines for cosmetics industry sold
Sales for the period under review significantly increased compared with 2016
EBIT for nine months slightly positive
Next down payment expected for a consisting major CNBM order by the end of the year
Kahl am Main, November 9, 2017 - In the course of the period under review the SINGULUS TECHNOLOGIES AG (SINGULUS TECHNOLOGIES) has further established itself in the solar market. Especially for the core segment CIGS (copper-indium-gallium-diselenide solar modules) SINGULUS TECHNOLOGIES projects a prolonged investment cycle. The key customer CNBM (China National Building Materials) has begun the assembly of four production sites for CIGS solar thin-film modules in China in meantime. At the fist site the production lines for CIGS solar thin-film modules have already been commissioned. The machines for the next site currently in progress were already ordered by CNBM in the previous year in the course of the ongoing major order. Here, SINGULUS TECHNOLOGIES expects the first prepayments towards the end of the year. CNBM is in negotiations with SINGULUS TECHNOLOGIES to place orders for the next two fabs which are planned and are already in progress. The timing of a possible contract placement depends on the progress of the projects and an agreement on the framework conditions.

Dr.-Ing. Stefan Rinck, CEO of SINGULUS TECHNOLOGIES AG, comments: "During the period under review we have also received large orders for CIGS production machines from other customers. This includes buffer layer coating machines of the TENUIS II type as well as vacuum coating machines of the GENERIS type."

In the market for crystalline cell technology SINGULUS TECHNOLOGIES' focus rests on innovative high-performance cells of the next generation, such as heterojunction solar cells (HJT), which will dominate the next expected investment cycle according to assessments by market research institutes. SINGULUS TECHNOLOGIES is currently introducing new machine concepts to the market and also targets a leading market position for the key production steps also for the production of heterojunction solar cells. In order to rapidly develop the Chinese market and to attain market leadership from the onset, SINGULUS TECHNOLOGIES has signed an agreement for the foundation of a joint venture with the two Chinese companies Golden Concord Holdings Limited (GCL) and China Intellectual Electric Power Technology Co., Ltd. (CIE). While SINGULUS TECHNOLOGIES will contribute its competence as an engineering company, CIE will provide its production process for high-performance cells and GCL, one of the world's largest companies in the solar market, will contribute its material and marketing know-how for the distribution of the machines.

In addition, during the period under review SINGULUS TECHNOLOGIES received new orders for several SILEX II processing machines from China and the US for the use in the manufacturing of HJT solar cells. With the SILEX II, SINGULUS TECHNOLOGIES has thus achieved a leading market position in the production of these solar cells.

Portfolio expansion to medical technology
For some time SINGULUS TECHNOLOGIES has been working on the introduction of new applications of its process and engineering know-how and now starts the strategically important entry into the growth market of medical technology. In the past days SINGULUS TECHNOLOGIES signed the first contract with a volume exceeding EUR 10 million for the sale of processing systems for the treatment of contact lenses. The machines will be supplied in 2018 to an international company operating in the medical sector.

Dr.-Ing. Stefan Rinck remarks: "This entry into medical technology means a strategically important portfolio expansion for the future. We have been working together in development projects with this customer for some time and have now developed a new process machine for the manufacturing of contact lenses." Dr.-Ing. Rinck continues: "We will introduce additional production machines for medical technologies. In particular, we have various production lines for vacuum coating technology in mind such as, for example, cathode sputtering machines for diverse coating and surface processing steps. We are also testing our multifunctional injection molding machines for the production of high-precision components within the medical sector."

At the beginning of October 2017, SINGULUS TECHNOLOGIES was also able to book the first order for a vacuum coating machine of the POLYCOATER type for the use in the cosmetics sector. The customer is preparing the further expansion of its production capacity and targets additional investments. In the meantime, another machine was ordered from SINGULUS TECHNOLOGIES by this customer.

At the end of September 2017, an agreement was reached with the company MPO International (MPO), France, to also offer solutions for the metallization of three-dimensional components in the cosmetics industry. In the course of this collaboration, MPO International plans to set up a line of the DECOLINE II type in France's Villaines la Juhel.

Consolidated key figures for the 3rd quarter and the first nine months 2017
During the first nine months of the current business year SINGULUS TECHNOLOGIES recorded sales of EUR 63.6 million, which was thus significantly above the level of the prior-year period amounting to EUR 36.7 million. Sales in the third quarter came to EUR 15.3 million, which is also higher than the prior-year level (previous year: EUR 12.1 million). On an operating basis (EBIT) SINGULUS TECHNOLOGIES realized a slightly positive result of EUR 0.4 million for the first nine months of the current business year (previous year: EUR -14.8 million)

At the end of the first nine months of the business year 2017 the order intake came to EUR 53.4 million, below the prior-year level of EUR 144.1 million. In the quarter under review the order intake came to EUR 27.3 million (previous year: EUR 12.6 million). The order backlog amounted to EUR 99.7 million as of September 30, 2017 (previous year: EUR 134.0 million). The levels of order intake and order backlog for the business year 2016 reflect the major order from the Chinese state-owned enterprise China National Building Materials (CNBM) with a volume of around EUR 110 million.

In the course of the first nine months of the business year 2017, the gross profit margin improved substantially compared with the previous year, amongst others due to a higher utilization rate. The financial result came to EUR -1.4 million (previous year excluding restructuring gain: EUR -2.8 million). As of September 30, 2017, the available liquid funds amounted to EUR 19.1 million (previous year:
EUR 18.5 million). The headcount within the SINGULUS TECHNOLOGIES Group declined slightly to 313 people as of September 30, 2017 (December 31, 2016: 318 employees).

Outlook for the business year 2017
For the current year, sales in a range from EUR 90 to 100 million are projected. In comparison with the previous year (EUR 68.8 million), an increase in sales of around 30 % to 45 % is thus expected for the current business year. The realization of sales also impacts the key earnings figures for the current business year. Due to an improved cost structure as well as a higher gross profit margin, SINGULUS TECHNOLOGIES was able to further lower the level of breaking even. While in the previous year a loss (EBIT) in the amount of EUR -17.7 million was reported, with the newly published sales range, an operating result (EBIT) in a range from EUR +2 million to EUR -3 million is expected. Accordingly, the company could still achieve to break even in 2017.

The company will publish a forecast for the business year 2018 with the report of the annual financial results for 2017.

Consolidated key figures 3rd quarter 2016/17

 
 
2016
2017
Sales (gross)
in million EUR
12.1
15.3
Order intake
in million EUR
12.6
27.3
EBIT
in million EUR
-5.5
-2.1
EBITDA
in million EUR
-4.8
-1.7
Earnings before taxes
in million EUR
-5.7
-2.7
Net profit/loss
in million EUR
-5.8
-2.8
Research & development expenditures
in million EUR
3.2
2.4

 

Consolidated key figures nine months 2016/17

 
 
2016
2017
Sales (gross)
in million EUR
36.7
63.6
Order intake
in million EUR
144.1
53.4
Order backlog (Dec. 30.09)
in million EUR
134.0
99.7
EBIT
in million EUR
-14.8
0.4
EBITDA
in million EUR
-13.0
1.8
Earnings before taxes
in million EUR
23.6
-1.0
Net profit/loss
in million EUR
23.4
-1.1
Operating cash flow
in million EUR
11.6
-18.2
Shareholders' equity (Sept. 30)
in million EUR
11.8
11.9
Balance sheet total (Sept. 30)
in million EUR
91.2
74.4
Research & development expenses
in million EUR
8.0
6.5
Employees (Sept. 30)
 
327
313
Weighted average shares outstanding, basic
 
2,323,916
8,087,752
Earnings per share, basic
EUR
10.07
-0.14

 

Contact:
SINGULUS TECHNOLOGIES AG, Hanauer Landstrasse 103,
D-63796 Kahl/Main,
Maren Schuster, Investor Relations, Tel.: + 49 (0) 160 9609 0279
Bernhard Krause, Corporate Communications, Tel.: + 49 (0) 1709202924












09.11.2017 Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG.The issuer is solely responsible for the content of this announcement.The DGAP Distribution Services include Regulatory Announcements, Financial/Corporate News and Press Releases. Archive at www.dgap.de

Language:
English
Company:
SINGULUS TECHNOLOGIES AG

Hanauer Landstrasse 103

63796 Kahl am Main


Germany
Phone:
+49 (0)1709202924
Fax:
+49 (0)6188 440-110
E-mail:
bernhard.krause@singulus.de
Internet:
www.singulus.de
ISIN:
DE000A1681X5, DE000A2AA5H5
WKN:
A1681X, A2AA5H
Listed:
Regulated Market in Berlin, Frankfurt (Prime Standard); Regulated Unofficial Market in Dusseldorf, Hamburg, Hanover, Munich, Stuttgart, Tradegate Exchange

 
End of News
DGAP News Service




627051  09.11.2017 





PfeilbuttonErgomed: „Evotecs fantastischer Erfolg ist ein positives Signal“ - Exklusiv-Interview
Pfeilbuttonmic AG: „Wir wollen Industrie 4.0 und Blockchain verbinden“ - Exklusiv-Interview
PfeilbuttonAURELIUS: „2017 wird das beste Jahr in unserer Unternehmensgeschichte” - Exklusiv-Interview


+++ Exklusive Interviews und Analysen - gratis in Ihre Mailbox! +++

Tragen Sie sich jetzt für unseren kostenlosen 4investors Newsletter ein.


Bestätigungslink nicht per Mail bekommen? Bitte kontrollieren Sie Ihren Spamordner!

Der 4investors Newsletter erscheint unregelmäßig, i.d.R. 2 bis 6 Mal pro Monat. Wir geben ihre Mailadresse an keinen Dritten weiter! Sie können den kostenlosen 4investors Newsletter jederzeit problemlos wieder abbestellen.
comments powered by Disqus


Aktuelle Nachrichten aus der 4investors-Redaktion

22.11.2017 - Drillisch: Neues aus dem Aufsichtsrat
22.11.2017 - Nordex Aktie: Beginnt gerade die Erholungsrallye?
22.11.2017 - Geely Aktie: Haben sich die Bullen ausgetobt?
22.11.2017 - BYD Aktie: Aufwärtsdrang schon wieder beerdigt?
22.11.2017 - CTS Eventim: Online-Geschäft verbessert die Margen
22.11.2017 - Pantaflix: Neuer China-Deal
22.11.2017 - Varta: Operativer Gewinn hat sich verdoppelt
22.11.2017 - Tele Columbus: Aktie nach neuer Prognose im Minus
22.11.2017 - Aurelius verkauft Studienkreis-Gruppe an IK Investment Partners
22.11.2017 - mic AG: Gelingt der Aktie jetzt der große Sprung?


Chartanalysen

22.11.2017 - Geely Aktie: Haben sich die Bullen ausgetobt?
22.11.2017 - BYD Aktie: Aufwärtsdrang schon wieder beerdigt?
22.11.2017 - mic AG: Gelingt der Aktie jetzt der große Sprung?
22.11.2017 - Evotec Aktie: Jetzt einsteigen - oder draußen bleiben?
22.11.2017 - Medigene Aktie: Shortseller in der Falle?
21.11.2017 - Fintech Group: Achtung, Aktie mit einem weiteren Kaufsignal
21.11.2017 - BYD Aktie setzt noch einen drauf - Kaufsignale
21.11.2017 - Commerzbank Aktie: Kommt der große Durchbruch?
21.11.2017 - Deutsche Bank Aktie: Spekulieren auf die Konsolidierung?
21.11.2017 - Evotec Aktie: Nervöse Shortseller - war das nur der Anfang?


Analystenschätzungen

22.11.2017 - Energiekontor: Neues Kursziel für die Aktie
22.11.2017 - Deutsche Rohstoff: Nach der Warnung
22.11.2017 - Uniper: Eine klare Ablehnung
22.11.2017 - Rheinmetall: Plus 16 Prozent
22.11.2017 - S+T: Weiter im Höhenflug
22.11.2017 - Novo Nordisk: Ein positiver Unterton
22.11.2017 - Aurelius: Exit stützt die Kaufempfehlung
22.11.2017 - Österreichische Post: Quartalszahlen beeinflussen Kursziel
22.11.2017 - BASF: Neues Kaufvotum
22.11.2017 - Wirecard: Gewinnprognose sinkt


Kolumnen

22.11.2017 - US-Daten zum Auftragseingang im Fokus - National-Bank Kolumne
22.11.2017 - Beiersdorf Aktie: Neues Allzeithoch in Reichweite - UBS Kolumne
22.11.2017 - DAX: Verlorenes Terrain zurückerobert - UBS Kolumne
21.11.2017 - Politische Sondierungen in Berlin deuten in Summa auf Neuwahlen - National-Bank Kolumne
21.11.2017 - Jamaika gescheitert – was sind die Folgen für Kapitalmärkte und Wirtschaft - Commerzbank Kolumne
21.11.2017 - HeidelbergCement Aktie: Kampf mit Trendlinie geht weiter - UBS Kolumne
21.11.2017 - DAX: Schwankungsintensität steigt - UBS Kolumne
20.11.2017 - DAX: Scheitern der Jamaika-Sondierungen als weiterer Belastungsfaktor - Nord LB Kolumne
20.11.2017 - Hohe politische Unsicherheit führt zu Kurssprung beim US-Dollar - National-Bank Kolumne
20.11.2017 - Walt Disney Aktie: Richtungsentscheidung naht - UBS Kolumne

Werbung

All Right Reserved by minimalthemes - ©2014 Stoffels & Barck GbR